Continuous Veneer Drying line-manufacture,factory,supplier from China

Since its establishment in 1999, Shine Machinery has always adhered to the development concept of continuous innovation and provided excellent solutions for customers.At present, our largest roller veneer dryer has been installed and runs smoothly in South Africa, capable of drying approximately 230 cubic meters of veneer in 24 hours.Recently, our 6-layer and 6-meter wide veneer dryer has also unveiled its mysterious veil. Currently, research and development are progressing smoothly, with an expected hourly output of around 15-18 cubic meters, which will further enhance the user experience.

Wood veneer needs to be dried before it is used, so that wood is not prone to problems in the future use, and the plate after drying is easier to save.

Shine  is about to access to upmarket in few years by upgrading intellectualized feeding system, collecting system, and now the veneer sorting line and moisture content(MC) detection. The intelligent equipment system--Vision Inspection and MC Detection has achieved impressive progress under study and analysis for some years，and the facilitating of the deep and further cooperation discussion with several intelligent development enterprises in the Intermnational Woodworking Exhibition in Shanghai, September, 2024. Beyond that, upmarket expansion is imperative, Shine has started th

The Vietnamese customer's 40-meter single-layer veneer drying equipment is being installed. Due to the impact of the epidemic, the engineer cannot go to the site to install it. We will guide the customer to complete the installation smoothly through the video, and thank the customer for their recognition of our products.

As the main equipment for drying wood, the veneer dryer's drying speed will directly affect the quality and efficiency of drying veneers. Therefore, we must fully understand the factors that affect the drying speed in order to make it better. play a role. Next, let's get to know each other together.One of the main factors affecting the drying speed of the veneer dryer is the temperature. The increase in temperature can accelerate the evaporation of moisture on the surface of the wood, so the drying of the wood will also be accelerated.

As the main equipment for drying wood, the veneer dryer's drying speed will directly affect the quality and efficiency of drying veneers. Therefore, we must fully understand the factors that affect the drying speed in order to make it better. play a role. Next, let's get to know each other together.One of the main factors affecting the drying speed of the veneer dryer is the temperature. The increase in temperature can accelerate the evaporation of moisture on the surface of the wood, so the drying of the wood will also be accelerated.

Shine Machinery is calling for Sales Agent for machinery related to veneer production in Europe, South East Asia, North America!!!Shine Machinery Co., Ltd is established in 1999 and specialized in R&D of machinery for the complete veneer production line, the products are involved in wood veneer peeling and veneer drying.

Recently, our customers in Guangdong came to our factory for a visit and inspection. It was our business who accompanied the customers and gave a detailed explanation of our veneer dryer and customers. After seeing the customers, they recognized our equipment, especially It is our biomass burner. We also answer some questions raised by customers one by one, and now we are making solutions for customers according to their needs. We welcome customers to visit our factory.

The veneer dryer needs to pay attention to some problems when drying wood. Before use, the heating fan should be started first, and when the drying temperature is reached, the speed regulating motor should be started. The veneer should enter from the feeding port longitudinally, the feeding should be straight, the veneer and the transmission roller should be connected at a 90-degree angle, and the veneer should be cut neatly before drying.

We have extensive experience in drying rubber wood veneer. Our dryer has the advantages of low card rate and easy maintenance of equipment.Reasonable roller diameter and roller spacing not only ensure that hot air can be evenly distributed on both sides of the veneer, but also greatly reduce the occurrence of veneer jamming. At the same time, the ellipticity of the roller does not exceed 100 um, and the straightness does not exceed 500 um, which also reduces the occurrence of jamming.